fuseholder blocks & clips FME www.schurter.com/pg02 b fuses fuseholder open design, holder for msf 125, panel mount 125 vac 5 a (ul/csa) description - panel mount, front side standards - ul 512 - csa c22.2 no. 39 approvals - ul file number: e39328 references general product informatio n fuseholder to msf 12 5 weblinks roh s , china-roh s , e-stor e , schurter-stock-chec k , distributor- stock-chec k , cad-drawing s , accessorie s , product change notification (pcn ) , product content sheet (pcs ) , white pape r technical data fuse-link microfuse 125 v mounting panel mount terminal solder rated voltage 125 vac rated current 5 a (ul/csa) degree of protection ip 40 admissible ambient air temp. -40 c to 85 c climatic category 40/085/21 acc. to iec 60068-1 material: socket thermoset, black, ul 94v-0 material: terminals silver-plated brass unit weight (socket/cap) 0.3 g storage conditions 0 c to 60 c, max. 70% r.h. product marking , approvals soldering methods iron solderability 350 c / 2 sec acc. to iec 60068-2-20, test ta, method 2 resistance to soldering heat 260 c / 10 sec acc. to iec 60068-2-20, test tb, method 2 contact resistance < 5 m at 20 mv dielectric strength > 3 kv between l-n (50 hz; 1 min) impulse withstand voltage > 4 kv between l-n insulation resistance > 10 m between l-n (500 vdc; 1 min) overvoltage category i - iii acc. to iec 60664-1 pollution degree 1 - 3 acc. to iec 60664-1 abmessungen 11.5 mm ? max. 3.2 ? 8.3 1.9x1.4 8.1 11.5 ? 4.7 ? 6.35 1.5 0 -0.1 4.8 4 +0.1 0 4.9 +0.1 0 +0.2 0 drilling? diagram variants holder order number l 0031.7503 packaging unit plastic bag (100 pcs.) the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|